Oil & Petroleum Testing Instruments

These viscometers are designed for viscosity tests of petroleum Products. They confirm to require- ments of IP 70.Two adaption of Red Wood viscometer are. available No.1 for liquids having Red Wood flow 20 seconds to 2000 seconds and No.II for liquids whose flow time exceeds 2000 seconds. The complete out fit comprises hammer finshed Stainless steel bath with electrical heating arragment suitable to operate at 220 Volts AC Mains with tap, silver plated oil cup with precision stainless steel jet, cup cover, ball valve, thermometer- clip. Stirrer and M.S.Sheet stand with levelling screws.

CAT NO	RED WOOD VISCOMETER NO. 1
2501	Electrically Heated Model With Energy Regulator control
2502	Gas Heated (with Gas Burner)
2503	Electrically Heated With Voltage Varrier (copper  coil).
2504	-with digital Indicator and controller & FHP Motor Stirrer & FHP Moter

CAT NO	RED WOOD VISCOMETER NO. 2
2505	Electrical Heated with Energy Regulator Control
2506	Gas Heated (with gas burnor)
2507	Electrically Heated with Voltage Varrier (Copper Coil)
2508	With Digital Indicator and Controller & FHP Motor Stirrer

If consists , Two Red Wood No.1 cup and Two Red Wood No 2 cup are installed in the bath. The bath is made from S.S Sheet temperature is controlled by Electronic Digital Temperature Controller. The Stirring is done by FHP electric motor in the heating compartment. the unit has 4 sets of Oil Cup Covers, hermometer Clips and ball valve. Suitable to operate on 220 Volts AC circuits.

2501 a	IP 8C (0/450C x 0.20 C) low range thermometer
2501 b	IP 9C (40 x 85 0 Cx 0.2 0C) Medium Range Thermometer
2501 c	IP 10 C (76x1220Cx 0.20C) High range thermometer
2501 d	Flask Receiver 50 ml capacity
2501 f	Spare cup with valve for Redwood No 1
2501 g	Spare cup with valve for Redwoood No. 2
2501 i	Spare heater for Redwood No 1 Apparatus
2501 j	Spare heater for Redwood No 2 Apparatus
2501 k	Spare ball valve for Redwood No.1 and No 2 App.
2501 l	Stop Watch Electronic Model
2501 m	Stop Clock Table Model

As per IP 72 And is 1206 Standards. It is used for determination the viscosity of road oils and cut back bitumen. If consists S.S. Bath with cup of 10 mm or 4 mm oriface and sleeve, Stirrer with lifting clip and ball. The assembly kept on suitable stand with levelling Screws. Suitable to operate on 220 Volts AC Mains.

2510	Electrical Heating with Energy Regulator Control
2510 A	Electrical Heating with Voltage Varrier (Copper Coil)

Consist 2 cups in a S.S Water Bath mounted on Stand with levelling feet fitted with 1000 watts ISI marked heater. Temprerature is controlled by DIGITAL ELECTRONIC CONTROLLER with F.H.P electric motor stirrer. Supplied with one Tar Cup 10 mm and one 4 mm orifice with valves PSAW 2511 Tar Viscometer Multiple Apparatus
OPTIONAL ACCESSORIES Price In

2510a	Spare Silver Plated Cup 10 mm or 4 mm orifice
2510 b	Measuring Cylinder 100 ml cap
2510 c	IP8C (0/450Cx 0.20C) Low Range Thermometer
2510 d	IP9C (40X850Cx.20C) Medium Range Thermometer
2510 e	IPI0C (76x1220Cx0.20c) High Range Thermometer
2510 g	Spare Heater 400 W
2510 h	Electronic Stop WAtch

2512	Electrical Heating with energy regulator control
2512 a	Electrical Heating with Voltage Varrier (Copper Coil)

OPTIONAL ACCESSORIES

2512 a	Engler ASTM 24C Thermometer (39/540Cx0.20C)
2512b	Engler ASTM 25C Thermometer (95/1050Cx0.20C)
2512 c	Ebonite Valve
2512d	Spare Wooden Valve
2512e	Flask 200 ml Capacity
2512 g	Spare Heater for above

Made as per ASTMD-88 specification with Universal and Furol Jets made of Stainless Steel. Stirring is done by hand with turn table arrangement (without trainer, withdrawl Tube and Glass Wares). Suitable to operate on 220 Volts AC mains.

2514	Elect. Heating with Energy Regulator Control 136.50
2515	Elect. Heating with Copper Coil Voltage Varrier 240.00
2516	Two Saybolt Tubes Viscometer Elect. Heating with Control Pannel (Double Walled) with Digital Electronic Controller and F.H.P Stirrer

OPTIONAL ACCESSORIES

2514 a	Strainer for filtering oil 23.00
2514 b	Withdrawl Tube (Metal) 5.00
2514 c	Spare Cup without jets 49.00
2514 d	Spare jet universal 6.50
2514 e	Spare Jet Furol 6.50
2514 f	Flask 60cc. 8.50
2514 h	ASTM 17C Range 19 to 270C 00C Thermometer 11.50
2514 i	ASTM 18C Range 34 to 420C Thermometer 11.50
2514 j	ASTM 19C Range 49 to 570C Thermometer 12.00
2514 k	ASTM 20C Range 57 to 650C Thermometer 12.00
2514 l	ASTM 21C Range 79 to 870C Thermometer 12.50
2514 m	ASTM 22C Range 95 to 1030C Thermometer 12.50
2514 n	COMMEN RANGE Themometer 0-1000C 10.50

This viscometer bath is used to maintain the correct constant Temprature for estimating kinemetic viscosity of oils & petroleum product. In this type of bath Various Viscometer may be fixed as an internal art of bath. The bath is rectangular in shape. Inside tank made of Stainless Steel Sheet. On two sides toughted glass provided for full visibility of objects. The bath is controlled by an electronic relay and Digital Contraller Temperature range 50C above room temperature to 1000 C. Accuracy 0.10C Stirring is done by a F.H.P elect. motor stirrer. It is supplied with viscometer tube holders and S.S. cover.

2519	Kinematic Viscometer Bath of chamber size 12”x9”x12” deep for 4 viscometer with Digital Temp. Indicator & controller
2521	Kinematic Viscometer Bath of chamber size 12”x12”x12” deep for 6 viscometer with Digital Temp. Indicator & controller
2521A	Kinematic Viscometer Bath with REFRIGERATION SYSTEM Temp. Range 00 to 1000C
2222B	Kinematic Viscometer to accomodate 3 glass Viscometer Tubes with round glass vessel. Digital Temp. Controller with Indicator Suitable up to 120°C Temp. accuracy 0.10C

OPTIONAL ACCESSORIES

2519 a	Viscometer U tube BS/USize A,B,C,D,E,F,G, & H
2519 b	Viscometer U Tube Reverse Flow ( for opaque)Size 2,3,,4,5,6,7,8,9,10 & 11
2519 c	Viscometer cannon Fenske, Direct Flow BS/IP/CF Viscority rangeSize 15,50,100,150,200,250,300,350,400,450,500 & 600
2519 d	Viscometer Cannon Fenske Reverse FlowSize 100,150,200,300,350,400,450,500 & 600
2519 e	Viscometer suspended level BS/IP/SL Size 1,1A, 2, 2A,3, 3A,4
2519 f	Spare Viscometer Holder
2519 g	Electronic Stop Watch
2519 h	Stop Clock Table Model
2519 i	Lighting Attachment

Note :- Please mention Size and Viscosity range of Viscometer tube with indent . The Viscometers supplies with Constant Certificate.

This type of cup has been in popular use for amny years and confirms to IS 3944-1965 specification. These are available in following sizes. Jet No. B-1,B-2,B-3 &B-6

2518	Flow cup viscometer
2518 A	Spare brass cup with any size jet

2520 A	Abels Flash Point App., Elect. Heating With Energy Regulator Control
A		Oil Test Jet
B		Gas Test Jet
2521A	-same as above – but with Concealed Hot Plate
A		Oil Test Jet
B		Gas Test Jet
2522A	Abels Flash Point App. With - Voltage Veriac Control-
A		Oil Test Jet
B		Gas Test Jet
2523 A	Abels Flash Point App with voltage varrier . &. Digital Temp. Indicator -Same as Above- with FHP. Elect. Driven Stirrer
A		Oil Test Jet
B		Gas Test Jet
C		Oil Test Jet
D		Gas Test Jet
2524A	bel Flash Point app. Temp Range –180C to +700C With REFREGERATION SYSYTEM as per IP-170 With oil Test Jet & Gas Test jet combine system

2520 a	Abel Oil Cup Thermometer(-35/700Cx005C) IP 74 C
2520 b	Abel Water Bath Thermometer (-30/800Cx005C) IP-75 C
2520 d	Spare cup for above apparatus
2520 e	Spare Top (Cover assemble) with shutter mechanism
2520 f	Spare Nichrome heating Element
2520 g	Pendulum for Measuring Time in Strokes
2520 h	Concealed Hot Plate with Housing

This apparatus is made as per IP 34, ASTMD –93 and IS 1448 (Part I) 1270 (P.221) and IS 1209-1953 method B. The Apparatus consists of brass test cup with handle removable cup cover with spring operated rotating shutter having Oil Test Jet/Gas Test Jet Flame Device Stirrer with flexible shaft. The assembly rests in Air Bath, which is covered, with Dome shape metal top. The cup is fitted with insulated Handle and Locking arrangement near cup flange, The assemble is kept on round shape electric heater with temp. Regulator. Suitable for operation on 220 Volts 50 cycles AC Circuits

255A	Pensky Marten Flash Point Apparatus. Elect. Heated with Energy Regulator
A		Oil Test Jet
B		Gas Test Jet
2526A	P.M Flash Point app. Elect. Heated with Concealed Hot Plate and Energy Regulator
A		Oil Test Jet
B		Gas Test Jet
2527 A	P.M Flash Point app. Elect. With Energy Regulator , & Hot plate. FHP. Motor Stirrer
A		Oil Test Jet
B		Gas Test Jet
2528A	P.M Flash Point App.With voltage variac Control and concealed Hot Plate
A		Oil Test Jet
B		Gas Test Jet
2528 A	P.M. Flash Point App. Voltage Variac with F.H.P Elect. Motor Stirrer
A		Oil Test Jet
B		Gas Test Jet
2530A	Pensky Marten Flash Point App. With Voltage Variac And Electronic Digital Temp. Indicator
A		Oil Test Jet
B		Gas Test Jet
2531	Semi Automatic Flash Point App. With electronic Temp. Controller, Automatic Dipping cycle withremote control Oil Test jet or Gas Test Jet

OPTIONAL ACCESSORIES

2525 a	Openclip for converting close model to open cup test model as per IP 35
2525 b	IP 15 C Low range (-7/110Cx0.50C) thermometer
2525 c	IP 16 C High Range (90x370Cx20C) thermometer
2525 e	spare cup with handle
2525 f	spare cover assembly
2525 g	spare nichrome heating element
2525 h	spare conceated hot plate with housing

This apparatus is used for determination of flash point of petroleum products except fuel oil with open cup flash below 80°C as per specification IP 36 and IS : 1448 (P : 69) 1969 The apparatus consists of a cup, heating plate to specific demension thermometer clip & test flame attachment with swivel joint for passing
over test liquid surface in the prescribed manner, Heating is controlled by means of energy regulator fitted to the apparartus. Suitable of adperation on 220 Volts 50 cycles AC circuits.

2532	Cleaveland Flash Point & Fire Point Appartus Electrical Heating with energy regulator Gas Test Jet
2533	With oil wick arrangement
2534	-same as above- Gas Jet& Oil wick arrangement combined model
2535	Cleaveland Flash Point & Fire Point Appartus voltage variac (Copper Coil) Combine Model
2536	-same as above- with Digital TEmp, Indicator
2532 a	Thermometer IP 28C(-50C to 4000C)
2532 c	Spare cup with handle
2532 d	Spare nichrome element
2532 e	L.P.G Test flame container with valve

This apparatus is used for penetration test on a wide variety of materials such as greases, petroleum, bitumen, tar, wax, polish, food stuff, rubber asphalts and pharmaceuticals creams. A given force is applied over a given period of times and the depression is made in the sample which is measured is tenths of a millimeter and express as penetration. It consists of a head support mounted on a vertical rod which can be adjusted for height. A rach and pinion and pointer assembly provides fine adjustment of needle tip to sample and in corporates a slipping clutch mechansium which make reading of penetration and aud subsequent resetting a
sample and accurate operation. The dial graduate from 0-400 in one tenth millimeter Sub Division. The Instrumets is supplied with sample containers.

2537	Penetrometer Apparatus with containers and weight having penetration Needle
2538 a	Penetrometer Apparatus with container and weights having peneteration CONE HOLLOW type
2538 b	-same as above- but with verier height adjustment system
2539	Penetrometer Apparatus with Electronic TIMMER & electrical arrangement with brass cone and Needle with DIGITAL TIMMER DEVICE (Adjustable)

OPTIONAL ACCESSORIES

2537 a	Spare penetration Needle (Pack of two) 8.00
2537 b	Spare penetration Solid Cone 19.50
2537 c	Spare penetration Brass Hollw Cone 19.50
2537 d	Grease Worker Hand Operated 110.00
2537 e	Grease Worker Hand Operated Big Handle (Lever type) 143.00
2537 f	Grease cutter as per IP 50 65.00
2537 g	Transfer dish

This apparatus is used for determination of distillation chracterstics of petroleum products. The Instruments consists of metals shield to support distillation flask with GEARED HEIGHT ADJUSTABLE DEVICE. It has a slot of vapour tube. A glass window is provided in front side for clear view of inside objects. It also has colling bath or condersor with M.S black painted stand Electrically Heated. The Instruments is supplied with two square asbestos boards with 50 mm and 70 mm holes. (Without glass wares)

2540	Single Distillation Apparatus electrically heated with energy regulator with gear device
2541	Single Distillation Apparatus with voltage varrier (Copper Coil) with gear device
2542	Twin (Duplex) Distillation Apparatus Elect. Heated model with two energy regulators with gear device
2543	Twin (Duplex) Distillation Apparatus with two voltage verriers (Copper Coil) with gear device
2544	Distillation Apparatus for crude Petroleum as per IP-24 with one glass condensor elect.. with Energy Regulator control

OPTIONAL ACCESSORIES

2540 a	Distillation Flask 125 ml 10.00
2540 b	Distillation Flask 250 ml 13.00
2540 c	Measuring Receiver 100 ml 11.50
2540 d	Spare Asbestos Board 38 mm or 50 mm or 70 mm Dia hole 3.25
2540 e	Thermometer IP 5C (-2/3000Cx1C) 10.50
2540 f	Thermometer IP 5C (-2/4000Cx1C)

It is used for determination of heat of combustion, calorific value and sulpher contents of solid and liquid fuels. The Bomb Body and lid are machined from corrosion resisting stainless steel rod its capacity is appox. 300 ml. It is provided with high pressure valve and electrodes. The calorimeter vessel, water jacket, Stirrer FHP motor driven are provided as per IP sandards. The Bomb Colorimeter is supplied with firing unit, Elect -ronic Digital Thermometer, Pellet Press, Ignition wire, and pressure guage on stand with copper pipe fitting.

2545	BOMB CALORIMETER APPARATUS With Digital Thermometer 0.10C read out.
2546	BOMB CALORIMETER APPARATUS Digital Thermometer with 0.010C Read with Remote Control Unit
2545 a	Spare Bomb 300 ml Cap.
2545 b	Spare Neoprene washer for Bomb
2545 c	Spare Stainless Steel Crucible