EXPERIMENTAL FLUME FLOW CHANNEL
APPARATUS : PSAW-724FM
The experimental
flume has a closed water circuit. The cross-section of the experimental section
is 86x300mm. The experimental section is 2.5m long and can be increased to 5m
with the help of extension element. The side walls of the experimental section
are made of tempered glass, which allows excellent observation of the
experiments. All components that come into contact with water are made of
corrosion-resistant materials (stainless steel, glass reinforced plastic). The
inlet element is designed so that the flow enters the experimental section with
very little turbulence.
The inclination
of the experimental flume can be finely adjusted to allow simulation of slope
and to create a uniform flow at a constant discharge depth.
A wide selection
of models, such as weirs, piers, flow-measuring flumes or a wave generator are
available as accessories and ensure a comprehensive programme of experiments.
Most models are quickly and safely bolted to the bottom of the experimental
section.
SPECIFICATIONS:
·
Basic principles of open-channel flow
·
Experimental flume with experimental
section, inlet and outlet element and closed water circuit
·
Length of the experimental section 2.5m
or 5m with extension element.
·
Smoothly adjustable inclination of the
experimental section
·
Experimental section with 10 evenly
spaced threaded holes on the bottom for installing models or for water level
measurement using pressure
·
Side walls of the experimental section
are made of tempered glass for excellent observation of the experiments
·
All surfaces in contact with water are
made of corrosion-resistant materials
·
Flow-optimized inlet element for
low-turbulence entry into the experimental section
·
Closed water circuit with water tank,
pump, rotameter and manual flow adjustment
·
Models from all fields of hydraulic
engineering available as accessories.
TECHNICAL DATA:
EXPERIMENTAL SECTION
·
Length : 2.5m and extendable up to 5 m with
extension element.
·
Thickness : 8 mm
·
flow cross-section WxH : 86x300mm
·
inclination adjustment : -0.5…+3%
·
Tank : 280 L
·
Side walls made of transparent toughened
glass.
PUMP
·
High pressure centrifugal pump
·
Type : EVMS 10-2 N5 HQGQIEGE/0.75MI –
230V/50 Hz
·
Power consumption : 1kW
·
Max. flow rate : 15 m3/h
·
Max. head : 21 m
·
Outer casing : 1.4301
·
Lower casing : 1.4301
·
Impeller : 1.4301
·
Shaft : 1.4301
MEASURING RANGES
·
Flow rate : 0…10m3/h
