§ The inner/outer chamber, steam jacket and boiler are made of heavy gauge
SS with leak proof argon arc welding.
§ The space between the outer chamber and steam jacket is filled with
glass wool to minimize thermal losses.
§ Hydraulically tested to withstand 2.5 times the working pressure.
§ Steam boiler is fitted with water level indicator, pressure gauge, low
water cut off device and automatic pressure control devices. Fitted with safety
valve as a safety device.
§ Drain valve is fitted at the side bottom for easy draining/clearing.
§ This affords a complete safety to the working personnel against
explosive opening.
§ Two separate valves are provided for evacuating steam from inner chamber
and jacket as and when desired.
§ Sterilization cycle is controlled by single point multiport valve.
§ The chamber discharge line is fitted with a moisture trap to absorb the
condensate automatically thus preventing moistening of the loaded material to
be sterilized.
§ An automatic vacuum breaker is fitted to all units as a standard
accessory in order to break vacuum in case of steam condensation.
§ The flanged immersion type heating element made from a very high grade
material provide fast formation of pressure in the system and are protected
through a electric low water level cut off device.
§ All sterilizers are provided with triple safety features through a
“Piezostate” (automatic pressure control system) and a spring loaded safety
valve fitted to the boiler/steam generator.
§ The chamber is fitted with spring loaded safety valve and a dead weight
release valve.
§ To work on 220/230 or 440 volts, 3 phase, 50 Hz AC supply.
|
Model No
|
16x24
|
16x36
|
16x48
|
20x36
|
20x48
|
|
Inner Dimension
|
400x600
|
400x900
|
400x1200
|
500x900
|
500x1200
|
|
Capacity
|
78 Liters
|
115 Liters
|
162 Liters
|
165Liter
|
121Liters
|
|
Heater Load
|
6KW
|
6KW
|
9KW
|
9KW
|
9KW
|
TECHNICAL SPECIFICATION
- Gasket: made of joint less silicon rubber.
- Exhaust pressure: manual through the exhaust
valve
- St erilizing pressure: 1.2 to 1.5 kgf/cm2 (15
to 20 psi) at 121C
- Operating pressure: from 15 psi to 20 psi
- Pressure gauge: 0.2.1 kgf/cm2 (30 psi)
- Tubular stand and supporting ring: made of
mild steel or stainless steel
- Pressure Vessel= SS 304 Grade Stainless Steel
- External Wall=SS 304 Grade Stainless Steel
- Top Lid=SS 304 Grade Stainless Steel
- Basket= SS 304 Grade Stainless Steel
INCLUDING
- Automatic pressure cut off switch
- Digital temperature indicator cum controller
- Vacuum breaker
- Water level indicator
- Automatic self locking system
- Automatic low water cut off switch
- Moisture trap
OPTIONAL
- Fully automatic PID purging system
- Fully automatic system with HMI PLC based
autoclave with data logger digital pressure indicator cum controller,
digital temperature controlled system can be installed on order.
- Multiport Valve
